Publicidad
Idiomas disponibles
Idiomas disponibles
support@yaberauto.com
Getting Started
Charging your Jump Starter
1. Please use a 5V 2A / 9V 2A
adapter to charge the product.
(adapter is not included)
2. It will take approximately 6 hours
to fully charge the unit when using
a 5V/2A adaptor. In order to extend
the battery life, please charge the
unit every 3 months.
Turn On your Jump Starter
Short press the power switch to turn on the device, and the LCD screen
will turn on. For energy saving, it will enter standby mode automatically if
you have not operation within about 20 seconds.
LED Light
Short press the ON/OFF button to turn on the device and then long press
the ON/OFF button more than 3 seconds to turn on the light mode. There
are three modes (illumination, SOS and flash). You can simply short
press the power switch button to change the lighting modes. And you can
also press the power switch button for more than 3 seconds to turn off
the light mode.
Dual USB Outputs
This portable jump starter is equipped with two USB outputs (Output
1:5V 2.1A, Output 2: 5V 2.4A/ 9V 2A/ 12V 1.5A) that provide the fastest
charging speed for your portable electronic devices, such as phones,
tablets, Bluetooth headphones, etc.
4
EN
Publicidad
