YaberAuto YA40 Manual Del Usuario página 11

Notes on Charging Your Car Battery
1. Use the original smart clip to start the car.
2. DO NOT use this unit if any cable clamp or cord is damaged.
3. Start only for 12V vehicles,or it will cause serious damages to the unit.
4. Don't jump start your car when the battery capacity is lower than 50%.
5. Do not connect two clamps together. And do not connect both cable
clamps to the same piece of metal.
6. If the engine does not start on the first try, disconnect it from the car
battery and wait for at least 60 seconds before reconnecting. Maximize
three attempts in 5 minutes.
7. Once the engine is successfully started, please disconnect the clamps.
Model
Output1
Output 2
Input
Voltage
Jump Starts Per Charge
Charging Temperature
Working Temperature
Product Dimensions
YA40
5V 2.1A
5V 2.4A/ 9V 2A/ 12V 1.5A
5V 2A /9V 2A
12 Volts
Up to 30
0 ~ 40℃
-20℃ ~ 60℃
186mm×89mm×45.5 mm
7
EN
support@yaberauto.com