Using The Nose Cap - Hitachi Koki NT 65MA4 Instrucciones Y Manual De Seguridad

Using the nose cap

● When attaching
the nose cap, be sure to remove
your fi nger from the trigger and
disconnect the air hose from the
nailer.
If you like to protect the surface of workpiece
against scratches or markings made by the
push lever, attach the accessory nose cap to
the push lever.
1 DISCONNECT AIR HOSE FROM NAILER.
2 Put the nose cap to the toe of the push
lever.
3 The nose cap is marked to indicate the exit
point of the nail, making alignment easier.
4 When not using the nose cap, secure in
the storage compartment located on the
reverse side of the magazine.
Nose Cap
Push Lever
2
Magazine
NOTE
● The nose cap may reduce nailing depth
due to its thickness. Re-adjustment of
nailing depth is required.
WARNING
or detaching
Disconnect
1
air hose
Nose Cap
English
17