+GF+ EA04 Manual De Instrucciones página 15

Instruction manual
4 Installation
4.1 Assembly actuator with ball valve Type 546 Pro
The electrical actuator can built on the ball valve type 546 Pro with the appropriate coupling piece and appropriate adapter:
Overveiw
Insert actuator adapter (4) on the valve shaft. Ensure that the actuator adapter that matches
the actuator square attachment is used!
Connect actuator and valve. To do so, insert the actuator adapter in the square attachment of
the actuator.
Fix the automated unit using the two screws (7) and washers (8).
1
2
Insert the two screws (1) into the hexagonal attachments in
the adapter panel (2).
3
Fix adapter panel (2) with the four screws (3)
4
(F03‐F04 = size M5x10, F05 = size M6x12, F07 = size M8x20).
5
6
Insert assembly panel (6) on the valve. Fix assembly panel
7
with the four screws (5).
8
Description
Electric Actuators Type EA04
15