Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
5.2
Using manual emergency override
The integrated manual emergency override is used to move the actuator manually into another position. The integrated manual
emergency override allows the actuator to continue operating temporarily if there is no power.
► If the actuator constantly or frequently fails: change actuator.
MAN
► Switch manual emergency override from position AUTO to MAN
► This achieves the following:
1. after a few seconds, the motor is shut off
2. the motor transmission output is bridged
5.2.1
Procedure
► Turn position display until desired position is reached.
► After override, switch manual emergency override switch from MAN to AUTO
► There are 2 ways of transferring the actuator to automatic operation:
a) With the actuator in function „MAN", by turning the position indicator, run to one of the end positions (open or closed).
If the final position switch is activated, the motor power is interrupted. Switch manual emergency override switch from MAN to AUTO.
The actuator is back in automatic operation.
b) Switch manual emergency override switch from MAN to AUTO. Deactivate power supply for a few seconds, this resets the actuator
which then changes into the automatic operation.
WARNING!
Removing the Phillips screw on the manual emergency override switch!
Irreparable damage to the transmission unit; if removed, the warranty expires.
► Never remove the Phillips screw.
► Only activate via the manual emergency override switch.
AUTO
Electric Actuators Type EA04
19
Publicidad
