Descargar Imprimir esta página

KRHÜNER 50469 Manual De Instrucciones página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING
1. Use a damp soapy wrung cloth clean the exterior and cylinder storage area of
your heater.
2. Make sure that no water gets onto the burners or pilot/light area. Wipe the heat-
er dry before use.
3. Don't use abrasive cleaners as they may damage the quality paint finish.
MAINTENANCE
1. Check flexible tubing between regulator and heater regularly and replace if per-
ished, worn or damaged. In any case replace tubing taking into consideration the
expiration date.
2. It is recommended that the heater be serviced every year by a competent person
in accordance with the Gas Safety (installations and use) Regulations 1998.
3. If any parts need replacing, they should be replaced only with the correct parts
supplied by the original manufacturer.
Model
Standard
Appliance category
Type of gas
Gas Pressure (mbar)
Injector's diameter(mm)
Destination countries
Heat input (Hs) KW(g/h)
GUARANTEE:
• This product is guaranteed against defects in materials and workmanship
for a period of two years from the date of purchase. Under this guaran-
tee the manufacturer undertakes to repair or replace any parts to be defec-
tive, providing the product is returned to one of our authorised service cen-
tres. This guarantee is only valid if the appliance has been used in accordance
with the instructions, and provided that it has not been modified, repaired or
interfered with by any unauthorised person, or damaged through misuse.
This guarantee naturally does not cover wear and tear, nor breakables such as
glass and ceramic items, bulbs, etc. If the product does not work and it is the
reason for returning it and it is within the guarantee period, please also show the
guarantee card and proof of purchase.
P.I.N.
KF-006B
EN 449-2002+A1-2007
I3+(28-30/37)
G30/G31
28-30/37
0.58
Spain
4.2KW (305g/h)
1008 CN 2595

Publicidad

loading