About ERP
A) Measurement and calculation methods
The gas hob was CE approval according to the Gas Appliance Directives 2009/142/EC.
The energy efficiency of this gas hob was tested and measured according to EN 30-2-1-1998+A1-2003+A2-2005.
The semi-rapid burner and rapid burner were tested separately; the auxiliary burner is not required for test because its nominal heat
input is less than 1.16kW.
The energy efficiency of the gas burners and the hob were calculated according to COMMISSION REGULATION (EU) No. 66/2014.
B) Rational use of the energy and the appliance
The gas hob is designed for domestic use only, please do not use for commercial.
The gas hob is designed for use with gas (LPG and Natural gas), the combustion products contain carbon monoxide and carbon
dioxide, the exhaust of combustion products is affecting our environment when reach a certain amount of CO and CO2.
To ensure the rational use of energy, please install the gas hob according to the specifications in clause 5, and please make sure you
are using the correct diameter of pan for each burner.
To ensure the safety use, please read this instruction manual before use; please follow the installation, operation and maintenance
guideline.
To ensure the optimal life expectancy of the gas hob, please follow the operation and maintenance guideline strictly; please do not
modify the appliance.
Please contact your local after-sale service for repairing and exchanging of the components (such as gas valve, control knob) if
necessary.
The materials of the gas hob are metal, please dispose the gas hob recycling when the gas hob comes to the end-of-life.
The packaging materials of this appliances is recyclable, please make good use of waste materials.
Consult the instruction manual before proceeding with installation or use of the appliance
ATTENTION!!!!!
This appliance must be installed in
compliance with the current
provisions in force and only used in
rooms equipped with adequate ventilation.
9