Franke FMYPL 608 POT BK Manual De Uso página 10

4. CONTROLS
A B
To activate the Keyboard and its functions, press Button A . The keyboard will be displayed at half intensity. If it is not
used for 15 Seconds it will revert to its original status.
Button Function
A Brief pressure: Turns the Motor off.
Turns the Motor on at speed one
Press for 2 Seconds: Activates / Deactivates the 24H
B
Function whereby the motor turns on at speed one for
10 minutes every hour.
C Turns the Motor on at speed two
D
Turns the Motor on at speed three
Activates Intensive speed. This speed is timed to run
for 6 minutes. At the end of this time the system will
E
automatically return to the speed set before.
It is disabled by pressing the Button or turning the Motor off. -
Activates Delay mode, with automatic shutdown of the
Motor, the Fans and the Lighting with a 15' delay.
F
It is disabled by pressing the button or turning the motor off. -
Brief pressure: Turns the lights ON/OFF at maximum
intensity.
G
Press for 2 Seconds: Turns the lights ON/OFF at redu-
ced intensity.
Brief pressure: reset Charcoal filter alarm.
Press and hold the button for 2 seconds with the filter
alarm active to perform a Reset.
H
5. LIGHTING
• For replacement contact technical support
("To purchase contact technical support").
10
C D E F
Led
-
The button is fully lit.
The button flashes.
The button is fully lit.
The button is fully lit.
The button flashes.
The button is fully lit.
-
-
All the buttons flash 3 times.
Charcoal filter alarm Enabled: All the
buttons flash twice.
Charcoal filter alarm Disabled: All the
buttons flash once.
Buttons H + C Flashing: Indicates the
need to wash the metal grease filters. The
alarm is triggered after the Hood has been
in operation for 100 working hours.
Buttons H + D Flashing: Indicates the
need to change the activated charcoal
filters, and also to wash the metal grease
filters. The alarm is triggered after the
Hood has been in operation for 200 wor-
king hours.
G H