Orbis Chronos Manual Del Usuario página 44

The programmable thermostats of Chronos series are designed for wall-mountig .
Alternatively they can be installed to cover three-module in built box.
the floor, away from direct sunlight, away from doors, windows, heat sources,
locations with excess or total lack of ventilation.
Connect the wires to the terminal
blocks of the base, as shown in the
Insert the batteries into the battery
compartment on the back of the
programmable thermostat, respecting
the polarity
Attention: it's not possible to make no programming or modification of the set
parameters until the instrument is not correctly installed on wall-mounted base
INSTALLATION
.
- 8 -
CHRONOS Programmable Thermostat User Manual
Fix the base on the wall using the
screws supplied.
Attach the programmable thermostat
to the base, at first mating teeth on
the higher side.
1
1
2