Programming Menu - Orbis Chronos Manual Del Usuario

With this menu it's possible to modify the
following operating parameters:
- Date and time
- Automatic operation programs
- Automatic operation temperatures
- Timings
- Advanced functions.
To modify the hour and the date set:
1. From normal operating display, press for a long time the key
starts flashing on field
2. Press the key
flashing. Parameters sequence to set:
seconds* -> minutes -> hours -> month ->day
3. Use the keys and
the next parameter.
(*) for seconds it's possible only the synchronisatin at value 00
4. Once all parameters are set, to exit and to go back to the programming menu, press
a short time the key
To exit and to go back to the normal operating (automatic, manual) press for a long
time or wait for the time-out expiration (30 seconds about).
Inside this menu it' s also possible to modify the parameters for winter/ Inside this menu it' s also possible to modify the parameters for winter/
summer time change. The procedure is described in a detailed way in the summer time change. The procedure is described in a detailed way in the
chapter "Summer time change" on page 23. chapter "Summer time change" on page 23.
This menu allows to modify the programmings of the automatic operation.
In default status the instrument is configured to perform the program P1 from Monday

PROGRAMMING MENU

to access parameters modification. The seconds field starts
to modify the values and the key
.
- 11 -
CHRONOS Programmable Thermostat User Manual
3s
until the symbol
to confirm moving to