3.9 Loading Paper
1.
Turn on the power.
2.
Press up on the cover open lever to open the paper cover.
CAUTION
When pressing up on the lever, take care that you do not pinch your fingers in the gap above
the top of the lever.
3.
Load the paper roll so that the printable side of the paper is facing up, as shown by
arrow A.
4.
Pull a few cm of paper straight out in the direction of arrow B.
5.
Close the paper cover until you hear a click. Paper is fed and cut automatically (by
the factory setting).
Refer to 5.3 Manual Setting of Memory Switches
— 33 —