Publicidad
Idiomas disponibles
Idiomas disponibles
EN
14
Release the click fastener previously fixed to
the axillary strap guide loop and join it to the
counterpart on the arm pad fastener by clasping it.
The shoulder pad pulley system is then connected
to the arm pad.
Information: The matching click fasteners have
the same colours. The outer fastener on the
reverse side is grey, the inner close to the body
blue.
16a
The fitting process is completed.
Removal
To remove the OmoControl, first open the twist and click fastener, then the attached blue click fastener,
the Velcro fasteners and the axillary strap. Then, slip the OmoControl off on the side affected with the
healthy arm.
16
Tip: You can find our video, which shows the attachment process, both on our
homepage and via the product-specific QR code.
15
Assume an upright position carefully. By turning
the BOA
system clockwise, the arm can now be
®
pulled towards the acromioclavicular joint.
16b
Publicidad
