Ultenic U10 Manual Del Usuario página 8

Disassembly
Removal of the metal tube
First press the release button on the
metal tube, and then just pull out the
metal tube. (Fig. 9)
Removal of the floor brush
First press the release button on the
floor brush unit, and then just pull
out the floor brush. (Fig. 10)
Removal of the dust container
Rotate the dust container in the direction of the
arrow. When the upper part of the dust container
is separated from the handheld unit, it can be
removed from the handheld unit. (Fig. 11)
Removal of the battery pack
Press the battery pack release button, hold the
battery pack with your hand and pull out the
battery pack assembly. (Fig. 12)
Note:
�. When the battery capacity decreases, and the usage time of the machine between charges
becomes shorter, you can purchase a new battery pack to replace it, so there is no need to
purchase a new machine.
�. The battery pack can only be used in this machine, it cannot be used for other purposes, and it
can only be charged using the power adapter that comes with it. Please do not disassemble
the battery pack or allow it to come into contact with liquids, so as to avoid damage or a short
circuit. Please do not put the battery pack near hot objects or open fl ames, and do not insert
sharp objects into the battery pack.
�. Do not allow children to use or play with the battery pack.
（9）
（10）
（11）
（12）