Ultenic U10 Manual Del Usuario página 9

How to use
Starting and shutting down of the machine:
1. When the floor brush is connected, press the power switch, and the machine will start and
default to the automatic working mode, which can be used for normal cleaning of the ground.
The machine will automatically adjust the motor power according to the volume of dust on the
ground, and the dust sensor indicator light on the machine body will change colour at the same
time (when cleaning dust-free ground, motor speed will change to low speed, the power
consumption will be reduced, and the battery power will last longer); Press the power switch
again to switch to super working mode, providing stronger suction, which can be used to clean
carpets, inside crevices and other hard to clean ground; press the power switch again to turn off
the machine.
2. When the floor brush is not connected, press the power switch, the machine will be in standard
working mode by default, which can be used to clean normal ground (at this time, the machine
has no automatic adjustment function, so it can only use at fixed power for dust collection);
Press the power switch again, the machine will switch to super working mode, providing
stronger suction, which can be used to clean carpets, crevices and other hard to clean ground;
press the power switch again, the machine will switch off .
Use of accessories
Insert the 2-in-1 accessories into the metal tube
or hand-held components and fix them for use.
Push back the brush head of the 2-in-1 accessory.
When you hear the "click" sound, it is fixed, and
then you can clean the gaps in corners, stairs,
keyboard, etc. (Fig. 13)
Push the brush head of the 2-in-1 accessory forward.
When you hear the "click" sound, it is fixed, and you
can clean furniture, bookshelves, curtains and other
places that are difficult to clean. (Fig. 14)
Insert the 2-in-1 accessories onto the metal tube to
clean the ceiling. (Fig. 15)
（13）
（14）
（15）