Qilive Q.6672 Manual Del Usuario página 11

5. USE
5.1 First use
Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a brand
new product, then dry thoroughly.
Important!
• Do not use detergents or abrasive powders, as these will damage the finish.
• After transport, unpacking and installation, let the appliance rest at least 2 hours in
vertical position before connecting to the power supply.
• Let the appliance run for at least 2 hours before inserting fresh or frozen foods.
5.2 Functions
When the refrigerator is the first time connected to mains power, the display will show
all icons for 3 seconds and beep tones are emitted. The refrigerator goes into normal
mode with the temperature of the refrigerating compartment set to 5°C and the freezer
compartment set to -18°C.
In normal mode the display shows the lock icon
no button is pressed.
5.2.1 Temperature setting
All settings are done on the control panel on the front of the refrigerator.
5.2.1.1 Setting the temperature of the refrigerator compartment
Press the refrigerator temperature setting
the refrigerator temperature icon
setting (14) button to decrease the temperature each time by 1°C. The
temperature of the refrigerator compartment cycles through the settings 4 → 3 → 2 →
1 → 8 → 7 → 6 → 5 °C, with 8°C being the highest and 2°C the lowest possible setting.
5.2.1.2 Setting the temperature of the freezer compartment
Press the freezer temperature setting
the freezer temperature icon
(13) button to decrease the temperature each time by 1°C. The temperature of
the freezer compartment cycles through the settings -19 → -20 → -21 → -22 → -23 →
-24 → -16 → -17 → -18 °C, with -16°C being the highest and -24°C the lowest possible
setting.
5.2.1.3 Mode setting
Press the mode
press the mode
super freezing → vacation
5.2.1.4 Super refrigerating mode
Press the mode
The refrigerating compartment is automatically set to 2°C.
Now press and hold the refrigerator temperature setting
3 seconds to set the duration of the super refrigerating mode. The display shows "2.5",
which means that the duration is set to 2.5 hours.
The refrigerator compartment automatically exits the super refrigerating mode when the
set time has expired.
(18). Repeatedly press the refrigerator temperature
(7). Repeatedly press the freezer temperature setting
(12) button to select one of the control modes. Repeatedly
(12) button to cycle through the super refrigerating
→ normal modes.
(12) button once to select the super refrigerating
11
(8), which turns off if for 30 seconds
(14) button until the display changes to
(13) button until the display changes to
EN
→
icon (15).
(14) button for