Eureka OLYMPUS 75 TOUCH Instrucciones De Manejo página 27

EN
3 DESCRIPTION OF THE APPLIANCE
1. Container lid
2. Container for coffee beans
3. Grinding adjustment knob
4. Opening / closing tab for coffee bean
container
5. Touch screen display
6. Dispensing nozzle
7. Grinding start up button
8. Filter holder fork
9. Power switch
4 LOCKING THE CONTAINER
Before starting operation, the coffee bean container (2) must be fitted:
• Insert the container (2) in its seat (Fig.3), aligning the hole with the screw located on
the side of the appliance (Fig.4) and lock it in position by tightening the screw. In the
case of a tin container, first insert the adapter (17) in its slot (Fig.3) positioning it with
the hole aligned with the screw on the side (Fig.4) and lock it in position by tightening
the screw.
5 INSTRUCTIONS FOR USE
5.1 INTRODUCTION
This appliance is capable of making very precise doses, as it is based on the grinding
time. It is also necessary to fine-tune the machine before starting to work, first of all
determining the type of coffee blend (more or less roasted), the degree of grinding,
the height of the filter holder fork (8) and the position of the dispensing nozzle (6).
The grinding time is then programmed for each dose button by weighing the grinding
product.
• After connecting the appliance to the electricity supply, press the tab (4) at the bottom
of the coffee bean container (2) to close it (Fig.5).
• Remove the lid (1) from the container (2) and fill it with coffee beans.
• Switch the machine on using the switch (9).
• Pull the tab (4) allowing the flow of coffee beans.
5.2 ADJUSTING THE DISPENSING NOZZLE
• Depending on the filter holder and the type of coffee beans used, adjust the height of
the dispensing nozzle (6)(Fig.7) to allow the coffee to flow out properly.
5.3 FILTER-HOLDER FORK ADJUSTMENT
• With the help of a Phillips screwdriver loosen the screw that holds the filter-holder
fork in place (8)(Fig.7).
• Raise or lower the fork in order to adjust it to the size of the filter holder.
10. Display for time / dose counter
11. Continuous delivery active icon
12. Decrease button
13. Increase button
14. Central control button
15. Dose 1 button
16. Dose 2 button
17. Adapter
27