Bosch 0601B23100 Manual Original página 32

32 | English
Warning! If operating or adjustment devices other
u
than those specified here are used or other proced-
ures are carried out, this can lead to dangerous expos-
ure to radiation.
Do not replace the integrated laser with a laser of an-
u
other type. A laser that is not compatible with this power
tool could pose a risk to persons.
Do not make any modifications to the laser equip-
u
ment. The setting options described in these operating
instructions can be used safely.
Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself. You could
blind somebody, cause accidents or damage
your eyes.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
Class 1
Consumer Laser Product
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the saw blade can lead to injur-
ies.
Wear a dust mask.
Wear safety goggles.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Danger area! Keep hands, fingers and
arms away from this area.
The table shows the recommended
speed setting depending on the material
to be worked: Aluminium, plastic, wood.
(Not available in all country-specific ver-
sions)
1 609 92A 8L3 | (06.03.2023)
Symbols and their meaning
When sawing bevel angles, the adjustable
fences must be pulled outwards or re-
moved completely.
3 601 M23 1.. Observe the dimensions of the saw
blade. The hole diameter must fit the tool
spindle without play. If it is necessary to
305 mm 30 mm
use reducers, ensure that the dimensions
of the reducer are suitable for the base
3 601 M23 14.
blade thickness and the saw blade hole
3 601 M23 1B.
diameter, as well as the tool spindle dia-
meter. Wherever possible, use the redu-
cers provided with the saw blade.
305 mm 25.4 mm
The saw blade diameter must match the
information specified on the symbol.
Shows the rotational direction of the SDS
bolt for tightening the saw blade (anti-
clockwise) and for loosening the saw
blade (clockwise).
Clamping lever closed:
The adjusted bevel angle of the tool arm
is held in place.
Clamping lever open:
Bevel angles can be adjusted.
Direction of rotation of the spacer for the
slide device for sawing wide mouldings.
175 mm
20 mm
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
47° (to the left) to 47° (to the right).
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Bosch Power Tools