Manusa SMART Manual De Usuario página 9

DTCXSL01EN - v1 - ENGLISH
6.2 - OPTIONS AVAILABLE IN THE USER MENU
REDUCED OPENING ON/OFF
This option enables / disables the reduced opening mode.
To activate, select the option RED OPENING ON on the
ADJUSTMENTS menu (the message in area 2 turns to
RED OPENING OFF). To return to the adjustments menu,
press the left or right buttons.
The opening width can be customised by an official service
technician.
PIN
This option allows the end user to change the Personal
Identification Number. To program the code, select the PIN
option. Once inside the menu, enter the current PIN code
with the selection buttons and press the central button to
confirm. Then enter and verify the new PIN following the
same procedure. The message PIN MODIFIED will show
on the display. To exit, press the central button.
DISPLAY
Use this option to choose what will appear in area 3 of the
screen: time, people counter, opening cycles or blank. To
program this option, go to the desired option (for instance
USR CYCLES) using the left or right button and confirm
using the central button. To exit, go to EXIT and confirm.
CLOCK
Use this option to change the current date and time. To
adjust time and date, select the option DATE or TIME with
the selection buttons, and confirm pressing the central
button.
LANGUAGE
You can choose the language display from four different
languages: Catalan, Spanish, English and French.
Select the language with the right or left buttons and
confirm pressing the central button (the message On
appears in area 3).
COUNTERS
Use this menu to reset the people and cycle counters to
zero.
To reset, select the desired counter (people or cycles)
using the selection buttons (the current value of the counter
will appear in area 3) and press the central button to reset
the value to zero.
CONTRAST
This option modifies the screen contrast. To modify the
value, press the central button and change using the
selection buttons.
The higher the number, the higher the contrast. To save the
settings, press the central button. To exit, go to EXIT and
confirm.
INSTALLATION
Shows the installation date of the door.
MAINTENANCE
Shows the date of the last technical service or intervention
TOTAL CYCLES
Shows the total number of cycles since the installation date
MAINT CYCLES
Shows the total number of cycles since the last technical
service or intervention.
SELECTOR VERSION
Shows the current software version of the SMART selector.
DOOR VERSION
Shows the current software version of the door.
9
SMART SELECTOR WITH LCD - USER MANUAL