Product Overview; Introduction; Features; Unpacking - Oki LE840 Guia Del Usuario

1. PRODUCT OVERVIEW

1. PRODUCT OVERVIEW

1.1 Introduction

1.2 Features

1.3 Unpacking

NOTES:
1. Check for damage or
scratches on the printer.
However, please note that
Oki Data shall have no
liability for any damage of
any kind sustained during
transportation of the product.
2. Keep the cartons and internal
packing for future
transportation of the printer.
Thank you for choosing the Oki Data LE840/LE850 series label printer.
This User's Guide contains from general set-up through to how to
confirm the printer operation using a test print, and should be read
carefully to help gain maximum performance and life from your printer.
For most queries please refer to this manual and keep it safe for future
reference. Please contact your Oki Data representative for further
information concerning this manual.
This printer has the following features:
• The print head block can be opened providing smooth loading of
media and ribbon.
• Various types of media can be used as the media sensors can be
moved from the centre to the left edge of the media.
• Web based functions such as remote maintenance and other advanced
network features are available.
• Superior hardware, including the specially developed 8 dots/mm (203
dots/inch) thermal print head which will allow very clear print at a
printing speed of 3, 6, 10, or 12 inches/sec. and 3, 5, 8, 10, or 12
inches/sec. with 11.8 dots/mm (300 dots/inch).
LE840
3ips
6ips
10ips
12ips
• Besides the optional Cutter Module, there is also an optional Strip
Module, RS-232C I/F card, Centronics I/F card, Expansion I/O Card,
Wireless LAN I/F the RTC/USB host I/F card, HF band RFID mount
kit and Narrow width platen kit.
Unpack the printer as per the Unpacking Instructions supplied with the
printer.
E1- 1
LE850
3ips
5ips
8ips
10ips
12ips
1.1 Introduction