Oki LE840 Guia Del Usuario página 64

2. PRINTER SETUP
2.8 Print Test (Cont.)
When using a Strip Module or an optional Cutter Module
It is necessary to set the issue mode, cut/strip position, etc. on the Printer
Driver or with TPCL in accordance with your printing condition.
For details of the TPCL, refer to the LE840/LE850 External Equipment
Interface Manual
Regarding how to use the Printer Driver, refer to the Help for the
Windows Printer Drivers screen.
To gain maximum performance and life from the Cutter Module or Strip
Module, periodic cleaning is required.
Before starting a cleaning, be sure to TURN OFF the printer to avoid risk
of injury.
For details of cleaning, refer to Section 4.1.3 Optional Cutter Module.
E2-50
2.8 Print Test