ADE BA 1601 Instrucciones De Operación página 30

Cleaning
Cleaning
NOTE on material damage
− Do not immerse the scale in water or other liquids.
− Do not under any circumstances use harsh, scraping, or abrasive
cleaning agents or the like to clean the scale. If you do, the surface
could be scratched.
− Wipe down the scale as needed using a lightly dampened, soft cloth.
− Disinfect the weighing surface and the sensors from time to time using a suitable
disinfecting agent (available at specialist retailers and pharmacies).
Fault/Remedy
Fault
No function
The scale appears to be displaying
false weighing results
SYMBOL
Analysis of body fat proportion not
possible.
"----" is shown on the display
" " is shown on the display
30
Possible Cause
‚ Are the batteries empty or have they been
inserted incorrectly?
‚ Is the scale standing on a firm, even surface?
‚ Is a device that can cause electromagnetic
disturbances located in the vicinity of the
scale?
‚ Remove the batteries from the scale and
wait a moment. Re-insert the batteries. The
data stored up to this point will be retained.
‚ For body analysis measurement: Was your
body cold during measurement? Then it's
possible your blood was circulating poorly.
Warm your hands and feet and repeat the
measurement.
‚ Were you standing still and barefoot on the
weighing surface during the measurement?
Your feet must be in complete contact with
the weighing surface and sensors.
‚ The maximum capacity of the scale (180 kg)
has been exceeded.
‚ The batteries are empty (see "Inserting/
changing batteries").
Body Analyser Scale BA 1601