Domo DO91102F Manual De Instrucciones página 45

DOOR CONVERSION
If you need to hinge your door on the opposite side, it is recommended that you call your local authorised
service agent to make this conversion or ask a technician. Before you reverse the door, you should ensure
the appliance is unplugged and empty. After reversing the door, leave the appliance alone for 12 hours
before switching it on. This allows the coolant to set.
The freezer is built with the door hinges on the right side. If you want to switch the direction in which the
door opens, follow the following instructions:
1. Remove the cover of the upper hinge (6).
2. Remove the 3 screws (1) that attach the upper hinge (5) to the freezer. Remove the upper hinge.
3. Lift the door and place it on a soft surface so that it does not get damaged.
4. Remove the 3 screws (8) that attach the lower hinge (2) to the freezer. Remove the lower hinge.
5. Remove the left front leg (4) and move it to the right side of the freezer.
6. Replace the cover plate (7) to the right side.
7. Before placing the lower hinge (2), remove the bolt (the right leg) (9) en reverse the direction of the
lower hinge. Install the lower hinge at the bottom left of the freezer with the 3 screws (8).
8. Screw the bolt (9) back into the lower hinge (2).
9. Place the door in its place, on the lower hinge (2).
10. Close the door and hold it in position while you attach the upper hinge (5) to the upper left corner of
the freezer with the 2 screws (1). Make sure that the door is straight before fastening the screws.
11. Place the cover (6) onto the upper hinge.
USE
TEMPERATURE CONTROL
The thermostat is located at the back of the freezer and can be set to MIN. (cold), NORMAL (colder) or
MAX (coldest). Position NORMAL is the recommended position for normal use.
· The running time and temperature are affected by where the freezer is located, how often the door is
opened and the temperature of the room the freezer is located in.
· When you use the appliance for the first time or after defrosting, adjust the control knob to the coldest
setting for at least 2 hours before introducing food to be stored, and then readjust to the middle
setting.
www.domo-elektro.be
45
DO91102F