Makita DRC300Z Manual De Instrucciones página 7

WARNING
Do not abuse the cord of the charger.
• Do not carry the charger while holding the cord or do not yank the plug
cord to disconnect from the power receptacle.
• Keep the cord away from heat, oil, chemicals, and sharp corners.
• Be careful with the place for charging to prevent the cord from being
stepped on, being caught, or being damaged due to excessive force.
Electric shock or a short circuit may result, causing ignition.
Do not use if the cord of the charger is damaged or if the power plug is
not firmly inserted.
• Electric shock, a short circuit, or ignition may result.
The battery mounting part of the charger has a charging terminal. Do not
allow foreign matter such as pieces of metal or water near the charging
terminal.
Do not cover the battery and the charger with a cloth or something
during charging.
• Charge the battery in a well -ventilated place. Otherwise, heating, rupture,
or ignition may result.
WARNING
Be sure to turn off the power and remove the batteries before care and
inspection to prevent this product from starting accidentally.
When inserting the battery into this product, be careful not to turn on the
power.
• When you install the battery in conditions where the power can possibly
be turned on (for example, when your finger is rested on the start/stop
button), this product may begin to move suddenly, causing an accident.
In the event of an inadvertent drop or collision, carefully check this
product, etc. for damage, cracks, and deformation.
• Damage, cracks, and deformation can be a cause of injury.
Move this product gently to prevent the product from being deformed
and damaged.
• Damage, cracks, and deformation can be a cause of injury.
If this product is not working properly or an abnormal sound is produced
when you use the product, turn off the power immediately and stop using
the product. Then, ask the shop from which you made a purchase or our
sales office to do inspection and repair.
• If you continue to use the product, injury or an accident may result.
Check for damaged parts.
• Before using the product, thoroughly inspect for damage on components
and check that the product works properly and provides predetermined
functionality.
• Check movable parts for proper positioning and tightening, and check
components for damage and proper fitting. Then, check all other areas
that can influence the operation to see if there is any abnormality.
• For replacement and repair of damaged components, follow the user's
manual. If no description is given in the user's manual, ask the shop from
which you made a purchase or our sales office to do repair.
Carefully keep this product in good condition.
• For replacement of accessories, follow the user's manual.
• Periodically inspect the cord of the charger, and if it is damaged, ask the
shop from which you made a purchase or our sales office to do repair.
Electric shock or a short circuit may result, causing ignition.
• When an extension cord is used for charging, inspect it periodically, and
if it is damaged, replace it. Electric shock or a short circuit may result,
causing ignition.
• Always keep the carrying handle dry and clean and do not allow it to come
into contact with oil, grease, etc.
When this product is not used, keep it in proper storage.
• Keep it in a dry, safe place out of the reach of children or in a dry place
that can be locked. An accident may result.
Pull out the charger from a power outlet when it is not used for charging.
• Not doing so can cause electric shock, current leakage, or fire due to
insulation deterioration.
WARNING
If you notice abnormal heat or other abnormal conditions during
charging, pull out the power plug of the charger immediately to stop
charging.
• If you let charging continue, smoke, ignition, or rupture may result.
CAUTION
Attach accessories securely in accordance with the user's manual.
• If they are not attached securely, it can cause injury, damage, or an
accident.
When carrying this product, always hold its carrying handle.
• Carrying the product while holding other than the carrying handle can
cause failure or injury.
Safety precautions for use of the robotic
cleaner
WARNING
Do not use this product in a high place with no enclosure or in a place
with a narrow width such as stairs.
• Doing so can cause injury or failure due to a fall of this product.
Do not use this product in a place where oil components such as edible
oil are floating, in a place where sprays and chemicals are used, such as
a barber shop, a beauty salon, a cleaning shop, or outdoors.
• Doing so can cause failure.
Do not use this product in a place with a person who cannot operate this
product properly, a young child, or an infant.
• Doing so can cause electric shock, an accident, or injury.
Do not use this product in a place with an animal, etc.
• Doing so can cause electric shock, an accident, or injury.
Do not use this product in a place with many people or with people
coming and going constantly.
• Doing so can cause electric shock, an accident, or injury.
Do not block the exhaust opening and suction opening or put in metals,
flammable foreign objects, etc.
• Doing so can cause electric shock, ignition, or failure.
Do not use this product near an object that may possibly block the
suction opening.
• Doing so can cause electric shock, ignition, or failure.
Do not throw this product into fire or heat it.
• Doing so can cause a short circuit, ignition, liquid leakage, or explosion.
Do not place this product in a high-temperature place, such as near fire
or a space heater, a place exposed to direct sunlight, and the inside of a
car under the blazing sun.
• Doing so can cause a short circuit, ignition, liquid leakage, or explosion.
Do not put objects over this product.
• Doing so can cause overheating, resulting in ignition.
Do not place this product in direct sunlight.
• Doing so may cause incorrect response of the LiDAR sensor and infrared
sensor, resulting in malfunction or failure.
Do not block sensors of this product or put in foreign objects.
• Doing so can cause faulty operation, malfunction, or failure.
Do not affix a sticker or tape on sensors and wheels.
• Doing so can cause malfunction or failure.
Do not sit on this product, place a heavy object on it, or give a strong
shock to it.
• Doing so can cause damage or failure of this product or injury. Pay special
attention when children are nearby.
4 ENGLISH