Publicidad
Idiomas disponibles
Idiomas disponibles
The numbers, shown on the right in the various boxes, represent the branch and item numbering of the different parts of the menu and are
shown on the display (providing a quick reference for the position where we are).
The following paragraphs describe each menu item in detail.
6.2.1
Settings
The "Settings" sub-menu allows us to reactivate the WIZARD (as at the first installation) and to access a series of parameters for customizing the
system.
6.2.1.1
WIZARD (loaded from the menu)
The easy configuration Wizard, proposed automatically at the first switch-on (see par. 4.2), can
be loaded manually from this menu item.
6.2.1.2
Languages
Selection of the language we want to use on the displays.
The choice is made by selecting the desired language (with the up arrow and down arrow
keys) and pressing "OK". The factory setting is given in chapter 8.
6.2.1.3
Day & Time
From this page we set the current day of the week and time, along with the preferred format
for the hours (that is 1 – 24, or 1 – 12 with AM or PM).
Paragraph 6.1.3 describes in detail how to set the time.
Date and time are not determined when the system leaves the factory.
6.2.1.4
Unit of Measure
Selection of the units of measure used by the machine.
The following table shows the units that can be selected; the choice is separate for each quantity.
Quantity
Head H
Flow Q
Temperature
The units of measure for flow are "m
given in chapter 8.
6.2.1.5
Pump Limits
If the system is not able to bear pressures or flows that are too high, it is possible to impose
maximum limits on the pump control.
The "MAX" value indicates that there is no active limitation.
The settable upper limits are shown in Table 1.
In the factory setting, these limits are not active, and both parameters are set at "MAX" (see
also the table in chapter 8).
Note: if the upper limits H
values larger than the limits; however, during activation these upper limits will never be exceeded (self-limitation of the system)
and the setpoints may not be reached.
Units of measure displayed
Metric units
m (metres)
m3/h
Table 4 – Units of measure
/h" (cubic metres per hour) or "GPM" (US gallons per minute). The factory setting is
3
and Q
are set at values lower than "MAX", it is possible to set the setpoints even at
max
max
ENGLISH
Figure 22
Figure 23
°C
21
Imperial units
ft (feet)
US GPM
°F
Figure 24
Publicidad
