SOMFY Sonesse 40 WF Instrucciones página 12

Ocultar thumbs Ver también para Sonesse 40 WF:

Idiomas disponibles

3.7.1. Adding/Deleting Control point

Orange LED blinks slowly when adding or deleting remote control.

Using a control point (A) that has been previously programmed to the motorised product:

1) Press and hold the control point programming button (A)

until motorised product briefly moves Up and Down. Green

LED blinks 5 times then orange LED blinks slowly.

2) Quickly press the programming button on the back of the

new control point (B) to add or delete control point and green LED blinks 5 times.

Using the Programming button on drive head:

1) Press and hold the drive head programming button until

motorised product briefly moves Up and Down. Green LED

blinks 5 times then orange LED blinks slowly.

2) Quickly press the control point programming button (B) to add or delete control point and green

LED blinks 5 times.

3.7.2. Disabling/Activating "RTS" radio technology when control point is

definitively programmed

Disabling the radio transmission saves battery life during shipment or for a long period of non-use

(eg storage). The following steps can only be performed in "User" mode.

Press and hold the programmed control point programming button or the drive head programming

button until the motorised product briefly moves Up and Down and green LED blinks 5 times. (Drive

is in programming mode)

TO DEACTIVATE RTS RADIO TECHNOLOGY:

a) Press the UP, MY and DOWN simultaneously until the moto-

rised product briefly moves UP and Down once and green

LED blinks 5 times.

TO ACTIVATE RTS RADIO TECHNOLOGY:

b) Briefly press the drive head programming button or plug in

the charger, the motorised product briefly moves UP and

Down once and green LED blinks 5 times.

Sonesse 40 WireFree RTS Li-ion

PROG.