Publicidad
ENGLISH
Overview
A - Status LED
B - Power button
C - Mic mute / mic monitoring button
D - Volume wheel
E - USB-C charge port
F - Microphone port
Charging
It is recommended to fully charge your headset before rst use.
CHARGE STATUS
Fully charged
10 % — 99 %
< 10 %
Usage with HP OMEN System
1. Power on the HP OMEN system
2. Power on the headset. The headset will automatically connect to the system.*
*Supported only on compatible HP OMEN systems
Pairing to Wireless Dongle
1. While the headset is o , hold the power button until the headset status LED
starts blinking red/green rapidly.
2. While the wireless dongle is plugged in, use a small tool to hold down the
pairing button inside the pin hole until the dongle LED starts blinking rapidly.
3. Wait until both the headset LED and dongle LED are solid.
The headset and wireless dongle are now paired together.
NOTE: The headset will lose pairing with the HP OMEN system after the headset
pairs with the dongle.
Pairing to HP OMEN System
1. In NGENUITY software, navigate to the "Settings" page
2. Under "HyperX Internal Wireless Audio Adapter" device, click on "Initiate Pairing
Mode"
3. Follow the on-screen instructions
Usage with Wireless Dongle
1. Connect the wireless dongle to your device
2. Power on the headset
Setting up with PlayStation 5
Go to the home page and select Settings > Sound
Microphone
• Input Device: USB Headset "HyperX Cloud II Core Wireless"
G - Detachable microphone
H - USB wireless dongle
I - Dongle pairing pin hole
J - Dongle status LED
K - USB-C charge cable
STATUS LED
Solid green
Breathing green
Breathing red
Audio Output
• Output Device: USB Headset "HyperX Cloud II Core Wireless"
• Output to Headphones: All Audio
Status LED
STATUS
Flash green and red every 0.2s
Pairing
Searching
90% — 100%: Solid green for 5s
Connected*
10% — 90%: Blinking green for 5s
< 10%: Blinking red for 5s
*Battery level indication
Power Button
• Power on/o - Hold button for 3 seconds to power headset on/o
• Battery level status – Press button to see the battery level status on the status
LED
o The status LED will automatically turn o to conserve battery life
Mic Mute / Mic Monitoring Button
• Mic mute toggle - Press button to turn the mic mute on/o
• Mic monitoring toggle – Hold button for 3 seconds to toggle mic monitoring
on/o
Volume Wheel
Scroll up and down to adjust volume level
WARNING: Permanent hearing damage can occur if a headset is used at high
volumes for extended periods of time.
HyperX NGENUITY Software
Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY
software features include:
• DTS Headphone:X • Adjustable EQ settings
• Adjustable auto shut-o behavior
• Battery level indicator
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at hyperx.com/support
LED
Slow breathing green
Publicidad
