Clear Data Memory; Rs-232 Interface Protocol - AD Instruments AD6810 Manual De Usuario

_______________________________________________________________________________
VII. CLEAR DATA MEMORY
To clear the memory of data logger, hold the REC button and turn the power on. The following
display will be shown in LCD. Users press the HOLD button to confirm the clearance of
memory. The unit is turned off after the memory is cleared.
If users do not press the HOLD button in 8 seconds, the memory is not clear. This timer could
avoid users accidentally clear the memory.
VIII. RS-232 INTERFACE PROTOCOL
Baud Rate:
Data Bits:
Stop Bit:
Parity:
Format:
©Copyright Abacanto Digital SA.
9600
8
1
None
ASCII
Manual de usuario AD6810
AD Instruments
119