Canopy Installation; Carrycot Assembly - UPPAbaby VISTA 2015 Manual De Usuario

PUSHCHAIR ASSEMBLY
ATTACHING/REMOVING THE SEAT
To Attach Seat: Lower seat onto frame in forward or reverse position
and press down until it clicks into place. Pull up on seat to ensure it is
locked to frame.
ATTACHING/REMOVING THE BUMPER BAR
STEP 1: Insert metal posts into bumper bar
attachment slots found on both sides of seat.

CANOPY INSTALLATION

STEP 1: Pull canopy fabric over seat back
recline button.
11
To Remove Seat: Simultaneously
push down release buttons
and lift seat from frame
STEP 2: To remove, press button at bottom of plastic
housing and lift bumper bar out .
STEP 2: Snap each side of canopy attachment to
seat frame.
.
STEP 1: Remove mattress.
STEP 3: Pull carrycot canopy handle upright until an
audible "click" is heard.

CARRYCOT ASSEMBLY

SETTING UP THE CARRYCOT
STEP 2: Pull both steel braces firmly towards the outer
ends of the carrycot into their respective sockets.
Make sure both braces are properly locked in place.
STEP 4: Zip carrycot cover onto carrycot frame.
12