Publicidad
Idiomas disponibles
Idiomas disponibles
EN
SNOW SAFETY RULES
•
Read all the instructions on the device and in the manual carefully before trying to go up and operate
the device. Keep this manual in a safe place for subsequent use and consult it regularly.
•
Before any use, familiarize yourself with all controls and check their proper functioning. Know how to
stop the device and cut the power in an emergency.
•
Start the device only on a hard and snowy surface.
•
Enter the handle with firmness to control the machine, you should not try to use it by one hand.
•
Before each use, it is imperative to check the general condition of the machine, the state of the snow
strawberry and the power cord. If you notice the slightest damage to the power supply or the socket, do
not connect the machine to the sector.
•
Let your machine adapt to the outside temperature a few minutes before starting to use it.
•
Do not operate the electric snow strawberry in an environment with flammable elements such as li-
quids, gas or dust. The sparks generated by the operation of the device can cause a risk of explosion.
•
Make sure the cleanliness of the area to be treated (absence of stones, branches, glass, metal and any
object that could damage the machine or be ejected violently).
•
Your snowlift should be powered using an electrical extension. The use of an unsuitable extension
could cause a risk of fire and electrocution.
•
Do not use this electric garden tool for any other task which is not intended to be used. Do not force
the engine.
•
Do not try to make an adjustment when the engine is in operation.
•
Always wear safety glasses with side protections.
If the machine hit a foreign object, follow these steps:
•
Stop the machine, relaxing the handle, wait until the snow strawberry stops completely, then unplug
the socket.
•
Carefully check any possible damage to the machine.
•
Repair or replace the snow strawberry in case it is damaged in any way.
•
Repair any damage before restarting the device and resuming work.
•
Use a suitable tool. Do not use the machine for any other work than that for which it was designed.
Disconnect the power outlet before any repair, cleaning or momentary absence
34
from the work area.
27/03/2023
Publicidad
