Publicidad
Idiomas disponibles
Idiomas disponibles
EN
START UP-AND STOP
To start the snowlift, follow the following steps:
1) Press and maintain the safety button
2) Stop the power controller
works, release the safety button
To stop your snowlift, you just have to release the power controller
WARNING : The snow strawberry continues to turn for a few
moments after stopping the engine. Wait for it to be completely
stopped.
OVERLOAD PROTECTION
This machine is equipped with overload protection. Safety will start if your
crazy snow is overloaded or if something blocks the snow strawberry.
In the event of an overload, the protection automatically disconnects the
electrical circuit of the engine. To restore the machine, proceed as follows:
1) Stop the snowlift and disconnect the diet.
2) Wait a few seconds for the snow strawberry to stop completely.
3) Remove debris or obstruction.
4) Let the engine cool for 5 minutes minimum.
5) Press the safety button (C).
6) Reconnect the machine.
7) Light the snowlift.
TIPS FOR USE AND SNOW REMOVAL
•
You must first unroll the power cable completely.
•
We advise you to start with the part closest to the electrical outlet by
moving away as opposite.
•
During snow removal check that the electrical cable is always behind
you.
•
Choose your axis well during snow removal as well as the orientation
of the evacuation duct.
40
2
.
14
to the handle. Once the snow strawberry
2
.
14
2
14
C
27/03/2023
Publicidad
