EVACUATION DUCT ADJUSTMENT
WARNING : make sure your machine is disconnected before performing Any adjust-
ment .
Loosen the tightening wheel and ad-
just the drain duct to your convenience
(between 0 and 60 °). Then tighten the
wheel.
Turn the crank to adjust the direction of
the evacuation duct (left
to the right)
USE
•
Inspect the device before use. Make sure the parts are properly installed and secure.
•
Inspect the area to be snowed before each use. Remove all objects such as pebbles, broken glass,
nails, doormat, wire or string that can be projected or caught up in the machine.
•
Always ensure that the evacuation duct is devoid of debris.
•
Let your machine adapt to the outside temperature a few minutes before starting to use it.
•
Do not try to use the snow strawberry if parts are frozen. Stop the machine and thaw the parts before
restarting.
•
Be careful if snow is blocked in the evacuation duct do not try to remove it before having disconnec-
ted your machine.
CONNECTION
•
The use of an extension is compulsory, it should the-
refore be verified that it is in good electrical condition,
as stipulated in the safety instructions of this docu-
ment. It is advisable to make a «knot» with the socket
and the extension, as on the diagram opposite.
27/03/2023
60°
EN
90°
39