Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
Overview
Mounting Location
INPUT/OUTPUT
USED FOR
Relay Output 1
Gate Operator, Door Strikes, Maglocks, Lights (For control only. Power
to be provided by external power supply), Alarm Shunt
Relay Output 2
Wiegand Output 1
26-bit, 30-bit, 32-bit, 37-bit
Wiegand Output 2
Input 1
Closed Door Sensor (Supervised EOL or unsupervised),
Closed Limit Gate Sensor (Supervised EOL or unsupervised),
Input 2
Open Limit Gate Sensor (Supervised EOL or unsupervised)
NOTE: For UL installations, only UL 325 Listed gate operators, UL 294 Listed electric door strikes or
UL 294 Listed maglocks may be connected to relay output 1 or 2.
NOTE: For UL installations, only a Listed UL 294 access control unit may be connected to Wiegand
output 1 or 2.
NOTE: The inputs can be used as a door sensor which will help detect the door ajar. The inputs can
also be used for detecting close limit reached and open limit reached.
PRE-INSTALL
LED Status Indicators
OUTPUT
WIEGAND
1
2
GATE
OUTPUT
SDA SCL
NO COM NC
NO COM NC
NETWORK
MOUNTING/POWER
Reset/Learn Button (back)
INPUT
1
2
WIEGAND
INPUT
D1 COM D0
D1 COM D0
1 GND 2
5
External Antennas
POWER
GND 12V-24V
POWER
ETHERNET
Ethernet Port
Power Adapter Port
ACCESS CONTROL
Mounting Location
Publicidad
