Step 5: Set additional functions
You can now optionally set the following functions:
Target humidity, fan speed/mode, timer function and LED light ring.
For more information on the individual functions, see sections 7.2 to 7.5.
Step 6: After use
1. Disconnect the mains plug from the socket after each use.
2. Empty any remaining water from the water tank
in the water tank
3. Allow the fi lter
5
function from time to time after use (see section "8.1 Filter drying
function").
If you want to reposition the air humidifi er, pull the mains plug out of the
socket and empty the water tank
the air humidifi er, make sure that you hold the device with both hands at
the bottom of the water tank
7.2 Setting target humidity
If desired, you can optionally set a target air humidity on the air humidifi er.
The target humidity indicator
If no value lights up in the target humidity indicator
70 % is reached and then switches off . In order to avoid overhumidifi cation of a room, we recommend that
you select a humidity between 40–60 %.
1. Use the target humidity button
2. The selected target humidity will light up in the target humidity indicator
target humidity indicator
the air humidifi er switches off automatically.
In order to achieve the desired target air humidity as quickly as possible, we recommend
keeping the windows and doors closed during use, as dry outside air could slow down
reaching the target air humidity.
7.3 Setting the fan speed/mode
The air humidifi er has three fan speeds ( I, 2 and 3 ) and two modes ( AUTO mode A
SL
).
when the device is not in use.
9
to air dry when not in use or use the fi lter drying
to avoid overfl owing. When carrying
9
.
9
shows the currently set target humidity (40 %, 50 % or 60 %).
13
to select your desired target humidity.
14
, the target humidity is set to 70 %. As soon as the target humidity is reached,
13
. Do not leave water
9
, the humidifi er humidifi es the air until a humidity of
13
25
. If no value lights up in the
13
and NIGHT mode