Beurer LB 300 Plus Instrucciones De Uso página 30

Problem Possible cause
The mains plug is not connected to
Control panel
the socket and/or not switched on
not illuminated/
no display.
The device is in NIGHT mode
Humidifier
starts at the
The device performs a measurement
lowest level
to verify that the target humidity is
even though the
still achieved.
target humidity
is reached.
The water tank
display lights
Air bubbles may have accumulated
up even though
at the tip of the water level sensor.
the water tank
is full.
No current
Water tank is empty. If the water
relative humidity
tank is empty, no humidity values
is shown on the
are shown.
display.
11. DISPOSAL
For environmental reasons, do not dispose of the device in household waste at the end of its service life.
Dispose of the device at a suitable local collection or recycling point in your country. Observe the local
regulations for material disposal. Dispose of the device in accordance with EC Directive Waste
Electrical and Electronic Equipment (WEEE). If you have any questions, please contact the local
authorities responsible for waste disposal. You can obtain the location of collection points for old
devices, for example, from the local or municipal authorities, local waste disposal companies or
your retailer.
Also ensure that the filter is disposed of properly.
12. TECHNICAL SPECIFICATIONS
Product name
Mains voltage/power:
Water tank capacity
Suitable for room sizes:
Evaporation output
Measurement range for relatively humidity:
Dimensions:
Weight:
Protection class:
Subject to technical changes.
13. WARRANTY
Further information on the warranty and warranty conditions can be found in the warranty leaflet supplied.
Solution
Insert the mains plug into a suitable socket.
Use the fan speed button to select another
fan speed or mode.
Lift the filter holder incl. filter and water level
sensor upwards out of the water and reinsert
everything again.
Fill the water tank
LB 300
220-240 V~, 50-60 Hz, 26 W
3 litres
Up to 45 m²
Up to 300 ml/h
20 % to 95 %
230 x 230 x 350 mm
approx. 2940 g incl. filter
Protection class II /
30
-