HOMCOM A90-256 Manual De Instrucciones página 23

ASSEMBLY INSTRUCTIONS
Assembly step 3
A.) Coupler Bar Assembly
The spindle assembly(28) to the vertical rod(03).on the
right side, using one Special Washer(#53) followed by the
Right Coupler Bar(#05),one D Shape Washer(#50), one
End Cap(#54) and secure with one Bolt (#39).
Repeat this process on the left side using the Left Coupler
Bar(#05).
B.) Pedal Tube Assembly
On the right side, align and attach the Pedal Connection
Joint(#08) on the Right Pedal Tube(#07) to the right
Crank(#13). Insert the Bolt for Right Pedal Connection
Joint (#31R) through one Washer(#55) and Washer(#59)
and turn to secure with Right Nylon Nut for #31R
Bolt(#44R).
PLEASE NOTE:
a):Turn COUNTERCLOCKWISE to tighten the Bolt for Left
Pedal Connection Joint(#31L)and CLOCKWISE to tighten
Left Nylon Nut for #31L Bolt(#44L).
b):Turn CLOCKWISE to tighten the Bolt for Right Pedal
Connection Joint (#31R)and COUNTERCLOCKWISE to
tighten Right Nylon Nut for #31R Bolt(#44R).
Next, align and attach the Right Pedal Tube(#07)to the
Right Coupler Bar(#05).Secure them together using one
Hex Bolt(#32)through one Washer(#49)fastened by one
Washer(#49) and one Nylon Nut(#45).
Repeat this process on the left side using Left Pedal Tube
(#06), and Bolt for Left Pedal Connection Joint(#31L).
Hardware Required
Bolt
#31L Bolt for Left Pedal
Connection Joint
#31R Bolt for Right Pedal
Connection Joint
#32 Hex Bolt (M10*70MM)[2 pieces]
#39 Bolt (M8*15MM) [2 pieces]
Washer
#49 Washer (M10)
[4 pieces]
#53 Special
Washer
(Φ25x19.5 mm)
[2 Pieces]
#59 Washer
(Φ25x13 mm)
[2 Pieces]
Nut
#44L Left Nut
(M12) [1 piece]
#45 Nylon Nut
(M10) [2 piece]
-23-
[1 piece]
[1 piece]
#50 D Shape
Washer
[2 pieces]
#55 Washer
(Φ25x17 mm)
[2 Pieces]
#44R Right Nut
(M12) [1 piece]