Monacor International JTS UF-20S/5 Manual De Instrucciones página 14

RF
1 2
RF
3 4 5
Contents
1 Safety Notes . . . . . . . . . . . . . . . . . 15
Applications . . . . . . . . . . . . . . . . . 16
2
2 .1 Conformity and approval . . . . . . . . . . . 16
3 Operation . . . . . . . . . . . . . . . . . . 16
3 .1 Connections . . . . . . . . . . . . . . . . . 16
3 .1 .1 Connecting multiple UF-20R / 5 . . . . . . . 17
3 .2 Switching on/off . . . . . . . . . . . . . . . 18
3 .3 Settings via the menu . . . . . . . . . . . . 18
3 .4 Basic settings and reset . . . . . . . . . . . . 18
3 .5 Setting the transmission frequency . . . . . . 19
3 .5 .1 Setting the frequency manually . . . . . . . 19
3 .5 .2 Selecting a frequency from a group . . . . . 19
3 .5 .3 Scan function . . . . . . . . . . . . . . . . 20
3 .5 .4 Saving preferred frequencies to
user-defined groups . . . . . . . . . . . . . 20
3 .5 .5 REMOSET function . . . . . . . . . . . . . 21
3 .6 Adjusting the output volume . . . . . . . . . 22
3 .7 Equalizer . . . . . . . . . . . . . . . . . . . 22
3 .8 Interference suppression . . . . . . . . . . . 22
3 .9 Making settings for the
transmitter from the receiver . . . . . . . . . 22
3 .10 Key lock . . . . . . . . . . . . . . . . . . . 23
4 Specifications . . . . . . . . . . . . . . . . 23
Transmission frequencies . . . . . . . . . . . .46
14
UF-20
B
-10
G:1 CH:1
ID: 1
532.625 MHz
AF
SETUP S
UF-20
A
Max.
G:7 CH:59
ID: 3
600. 750 MHz
AF
6
A
Max.
ID: 3
RF AF
PUSH / CONTROL
A
Max.
ID: 2
RF AF
EXIT X
PUSH / CONTROL
SETUP S EXIT
7 8
Overview
1 UF-20R / 5 only: Mounting hole for the set of
front antenna jacks RTF-UF20
The set can be used to install the antennas (2)
on the front panel of the receiver
2 Receiving antennas, to be inserted into the
antenna jacks (17)
3 Button REMOSET to transfer settings from the
receiver to the wireless microphone/pocket
transmitter
4 RF (radio frequency) indicators to indicate the
power of the radio signal received
5 AF (audio frequency) indicators to indicate the
volume of the audio signal received
6 Display, for details refer to fig 5 on page 18
7 Button SETUP
- To call up the setup menu shown in fig 2,
keep the button pressed for 2 seconds until
the menu appears on the display
- To save a setting, press the button briefly
8 Control knob PUSH / CONTROL
When the menu has been called up:
- Turn the knob to select a menu item or to
change a setting
- Press the knob to call up a menu item
PUSH / CONTROL
UF-20
G:7 CH:59
600. 750 MHz
SETUP S
PUSH / CONTROL
UF-20
G:1 CH:16
597. 000 MHz
SETUP S
X
9 10 Fig. 1 Operating elements
UF-20S/5
UF-20S
wireless receiver
EXIT X
UF-20R/5
UF-20R
wireless receiver
EXIT X
1