Publicidad
Idiomas disponibles
Idiomas disponibles
Short screw
Wall
Metal bracket
Nylon strap
Tools required (not provided): Phillips screwdriver, stud finder, tape measure, pencil, power drill and
9. Position the unit at the desired location against a wall. If necessary, adjust the Floor Levelers at the
bottom of the Side Frames (B and C) to level the unit.
10. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to
attach the tip-over restraints to the unit and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance. Young children can be seriously
injured by tipping furniture. You must install the tipping restraint hardware with the unit to prevent the
unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a
deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not
earthquake restraints. If you wish to add the extra security of earthquake restraints, they must be
purchased and installed separately.
11. The unit is now ready for use.
Assembly Instructions
Long screw
1/8" drill bit.
6
Wooden stud
Wall
Floor leveler
Publicidad
