Publicidad
Idiomas disponibles
Idiomas disponibles
Music streaming
• Once the UPnP/DLNA compatible server is configured to share media files with your radio, you can start streaming music.
• On the main menu, select Media Centre and choose UPnP.
• It may take a few seconds for the radio to complete the scan for available UPnP servers. If no UPnP servers are found, it will
show Empty List.
• After a successful scan is done, select your UPnP server.
• The radio will show the media categories available from the UPnP server, e.g. 'Music', 'Playlists' etc.
• Choose the media files you wish to play. You can set the mode of playback under Configuration > Playback setup.
My Playlist
You can make your own playlist for the UPnP music files. Choose and highlight the song you want to add to a playlist, press
[
] until the
sign appears. The song will be added to My playlist.
Clear My Playlist
Remove all songs in "My Playlist" to allow a new playlist to be prepared.
Note: If you have DLNA compatible servers available, follow the steps described above to browse the audio files from DLNA
compatible device on the tuner to play.
If there is Digital Audio Broadcasting (DAB) in your area, the tuner can pick up the DAB stations as well (no internet
connection is required). The tuner supports both DAB and DAB+. Connect the supplied wire antenna with the antenna
connector on the rear of the tuner. Place the tuner close to the window and extend the antenna as far as it can go to get the
best reception. On the main menu, scroll to DAB Radio or use the [Mode] button on remote to switch to DAB Radio.
Choose DAB full scan to confirm scanning if this is the first time using the DAB radio. Start scanning , the progress will be
shown (number of channels received) on the display. When done scanning, a preset page will be displayed.
You can select the channel and start listening to it. Whenever you want to add a channel to My Favourite, press [
] on
remote. Press the [◄] button to return to the Preset list.
Note: When a DAB station is playing, press [Info] to view more channel information. Each time you press [Info], a different
form of information will be displayed such as radio frequency, rolling texts (if available), etc. New digital radio stations
should be picked up automatically by the radio if they are part of a multiplex you already received. Otherwise, initiate a full
scan once more.
To receive FM stations (no internet connection is required), Connect the supplied wire antenna with the antenna connector on
the rear of the tuner. Place the tuner close to the window and extend the antenna as far as it can go to get the best reception.
On the home screen, scroll to FM Radio or use the [Mode] button on remote to switch to FM Radio. Press [OK] to start.
Choose FM full scan to scan for FM stations. When done scanning, the tuner will automatically save the found stations and
present you with a list.
You can select the channel and start listening to it. Whenever you want to add to My Favorite, press [
] on remote.
Press [◄] to return to the Preset list.
Note: When it is playing FM radio, press the [Info] to view more radio information. Each time you press [Info], a different form
of information will be displayed such as radio frequency, rolling texts (if available), etc.
Manual Tune
To manual tune to the frequency, press [
] or [
]. Long press to skip to the previous/next available station.
Before transmission between your BT device and the radio is possible, both devices must be coupled. This process is called
"pairing". The radio is served as a receiver, to receive music stream to play on the radio.
If you have already coupled to a BT device before, this connection will be restored automatically when both devices are in
range and BT operation has been selected on the radio. "Pairing" does not have to be repeated. This function
may need to be activated in your BT device, however.
10
Publicidad
