Audizio 102.242 Manual De Instrucciones página 7

On the alpha-numeric keypad, press a button repeatedly to cycle through the characters assigned to each button. Refer to the
following list. To input a character, highlight it and press the [►] button to confirm and input the next character. When it
comes to the last character of the password, press [OK] to complete the entry.
Button 1: 1 and different kind of symbols !@#$%^&*()_+[]{};:'"\|,./<>?
Button 2: 2ABCabc
Button 3: 3DEFdef
Button 4: 4GHIghi
Button 5: 5JKLjkl
Button 6: 6MNOmno
Button 7: 7PQRSpqrs
Button 8: 8TUVtuv
Button 9: 9WXYZwxyz
Button 0: 0
Please ensure the following is ready: You have a broadband internet connection. A wireless broadband router is connected to
the internet. The radio supports Wireless B, G and N connection (Wireless N router can also be used with the setting on B or
G). You know the Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption code/password. You need
to key in the correct code when the radio is connected to the wireless router for network connection. If you do not know the
code/password, please contact the person/technician who set up the router/network for you. The radio can work via Wireless
network connection (Wi-Fi connection).
• Remove the tuner from the package box.
• Setup a connection with external speakers.
• Plug in the power adapter and set the power on/off switch (on the rear of the device) to ON.
Caution: Use only the adapter supplied with the radio. Connecting a power supply with a different rating can cause
permanent damage to the radio and may be hazardous.
Internet connection can be setup via Wireless LAN (WiFi). Your Radio requires a broadband Internet connection.
•
If this is first time use, the Configure Network wizard will be displayed. Choose Yes to start configuring the network.
Navigate by using the directional buttons to highlight Yes and press [OK] to confirm.
•
Select Wireless Network and choose Add Wireless Network from the list, press [OK] to confirm, then select Scan &
Select.
•
It will start scanning for available Wi-Fi networks. Scroll to your network and confirm your selection. If your wifi
network is password protected, it will ask you to enter the passphrase/password.
Note: The password is case sensitive. Please consult with the one who setup your network if you don't know the
password.
•
When the Wi-Fi connection is successful, "Association Complete" will be shown briefly. The WiFi signal bar will
appear on the top left corner of the display.
7