Audizio 102.242 Manual De Instrucciones página 12

•
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation between different countries.
Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi-Fi performs satisfactory.
We have already set the channels according to the requirement in different countries. Choose the country you are
staying from the list to get the correct channel.
•
Network connection test
In case there are any issues in connecting to Skytune, select this option to check out any failed items of the network
parameters for further diagnosis.
Date and Time
The radio will set your local time automatically after the internet connection is completed. If you want to do a manual setting,
change it by the following options.
•
Time zone
Auto-set Time Zone: This option is set by default.
Manual-set Time Zone: Choose this option if you want to set the time in another region.
Choose and highlight the region/city you prefer and press [OK] to confirm.
Coupled with NTP (use network time) and DST (Daylight time saving) will be adjusted automatically if you choose to
use network time (NTP).
•
Set Time Format
Choose either 12-hour or 24-hour notation.
•
Clock style
You can choose a digital- or analog style clock graphic. The selected style will apply in standby as well as the big
clock display in radio playback.
•
Set Date Format
•
DST (Day Light Saving)
Enable on/off.
•
NTP (Use network time)
NTP is designed to synchronize a device's clock with a time server. Your radio will synchronize the time server by
default every time it powers up and connects to Internet. This ensures a very high degree of accuracy in the radio's
clock. You can change to use other time server by inputting the URL address (see below NTP server). You can choose
"Do not use network time" if you don't want it to. If you choose not to use NTP for clock synchronization, highlight
the NTP (Network time protocol) and press [OK] to make the change. You will see the Set Date & Time appeared on
the menu. Select it and adjust the date and time as desired.
•
NTP Server
NTP is designed to synchronize a device's clock with a time server. This sub-menu shows the server being used.
Language
The default language is English, you can choose other languages as preferred. Scroll with the [▲ /▼] buttons on remote to
the item with and press [OK]. Scroll to highlight- and press [OK] to select your language of choice. Multiple languages are
available.
DAB Setup
•
DAB full scan
You can always carry out a new DAB scan by selecting this option. All current presets and channels will be erased.
•
DAB station status
This is to show the number of stations and signals received of each DAB frequency.
•
DAB station list
The scanned DAB stations will be listed here for management. You can move position or delete any station. Scroll to
the station and press [►]. A pop-up window will be presented: Move up, Move down and Delete.
FM Setup
•
Scan setting
Either "All stations" or "Strong stations" (with stronger signal) can be selected.
•
Audio setting
You can choose to set "Auto Stereo" or "Forced mono" for the reception.
•
FM full scan
You can always carry out a new scan of FM channels by selecting this option. All current presets and channels will be
erased. The radio channel at the lowest frequency of the scanned values will be highlighted. The preset list will be
saved unless a new preset scan is carried out.
•
FM station list
You can adjust the preset ranking by Move down, Move up or Delete it. Highlight one of the presets, then press the
[►] button, it will enter the Edit menu. Press the [◄] button to return to the Preset list.
Local Radio
The radio is set by default to detect the radio stations in your local area automatically by internet connection and these
stations can be accessed in the Local Radio menu in the Skytune menu. You can also set "Local" in another region if desired.
Highlight Local Radio and press [OK]. Choose Manual-set Local radio to change the region setting.
12