Saving, Retrieving And Deleting Results - Beurer medical BM 58 Manual De Instrucciones

WHO classification on the unit always indicates the higher
range (grade hypertension in the example described).
Range of Systolic
blood pressure (in mmHg)
values
Grade 3: Severe ≥ 180
hypertension
Grade 2: Mode- 160 – 179
rate hyperten-
sion
Grade 1: Mild 140 – 159
hypertension
High-normal 130 – 139
Normal 120 – 129
Optimal < 120
Source: WHO, 1999

7. Saving, retrieving and deleting results

• The results of each successful measurement are stored
together with date and time. With more than 60 items of
Diastolic Measure
(in mmHg)
≥ 110 Seek medical
advice
100 – 109 Seek medical
advice
90 – 99 Have it che-
cked regularly
by doctor
85 – 89 Have it che-
cked regularly
by doctor
80 – 84 Check it
yourself
< 80 Check it
yourself
measured data, the earliest items of data measured are
lost.
• Move the touch screen activation switch to the ON posi-
tion.
• Make a selection with the MEM button, and then confirm
the desired user memory with the START/STOP button
If you press the MEM button again, the average value of
all the stored measured values in the user memory will be
displayed. If you press the MEM button again, the aver-
age value of the last 7 days for the morning measurement
will be displayed (Morning: 5 a.m. – 9 a.m., display
you press the MEM button again, the average value of the
last 7 days for the evening measurement will be displayed
(Evening: 6 p.m. – 8 p.m., display
press the MEM button, the most recent individual meas-
ured values with date and time are displayed in turn.
• You can delete the memory by pressing and holding the
MEM button for 3 seconds. All the values in the current
user memory are deleted after three beeps are output.
• To switch off the device, press the MEM button again or
the START/STOP button
vation switch to OFF.
• If you forget to switch off the device, it will switch off
automatically after 2 minutes.
26
). If you continue to
or push the touch screen acti-
.
). If