Petsafe PDT19-14596 Manual De Funcionamiento página 11

Receiver Collar LED – Function and Response
Receiver Collar
Function
Receiver Collar is turned on
Unit is on
Spray activation
Low battery condition
Tone being received
STEP 3
Fit the Receiver Collar
Important: The proper fi t and placement of your Receiver Collar is
important for effective operation.
To assure a proper fi t, please follow these steps:
1. Make sure that the Receiver Collar is turned off.
2. Start with your dog standing comfortably (
3. Place the Receiver Collar on your dog's neck close
to the ears. Centre the unit underneath your dog's
neck, touching the skin (
logo on the front of the unit is upright. Note: It is
sometimes necessary to trim the hair along the path
of the spray. It is important that the spray reaches
your dog's snout to be effective.
Do not shave the pet's neck as this
may increase the risk of skin irritation.
4. Check the tightness of the Receiver Collar by
inserting one fi nger between the collar and
your dog's neck ( ). The fi t should be snug
3C
but not constricting.
5. Allow your dog to wear the Receiver Collar for
several minutes then recheck the fi t. Check the fi t again as your dog becomes more comfortable
with the Receiver Collar.
LED Response
Green LED fl ashes one time
Green LED fl ashes once every fi ve
seconds
Red LED fl ashes between sprays when
Spray Button is held down
Red LED fl ashes three times every fi ve
seconds
Green LED fl ashes
).
3A
). Make sure the PetSafe
3B
www.petsafe.net
Receiver Collar
Beeper Response
Beeps low to high
None
None
None
Tone beep
3A
3B
®
3C
11