Dell OptiPlex 7040M Manual Del Usuario página 14

Installing the coin cell battery
1. Hold the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the
connector.
2. Press the battery into the connector until it locks into place.
3. Install the:
a. VGA board
b. hard drive assembly
c. cover
4. Follow the procedure in
Removing the system board
1. Follow the procedure in
2. Remove the:
a. cover
b. hard drive assembly
c. VGA board
d. system fan
e. heat sink
f. processor
3. To remove the plastic tab:
a. Remove the screw that secures the plastic tab to the system board [1].
b. Lift the plastic tab away from the system board [2].
4. To remove the system board:
14 Extracción e instalación de componentes
After Working Inside Your
Before Working Inside Your
Computer.
Computer.