wtw Multi 3410 Manual De Instrucciones página 3

Multi 3410
Display (example: pH measurement)
3
2
1
Jack field /connections
1
5
Initial
commissioning
ba75806y01 11/2009
3 2
4
1 Insert the supplied rechargeable batteries.
Make sure that the poles are in the correct position.
2 Connect the power pack if necessary.
The batteries are charged.
3 Switch on the meter with the <On/Off> key.
Caution
Follow the safety instructions of the used sensors.
The operating manuals of the sensors are available on the supplied CD and on
the Internet under www.WTW.com.
1 Status information
4
2 Measured value (with unit)
3 Measured parameter
4 Continuous measurement control
(CMC function)
5
5 Sensor symbol
(calibration evaluation)
6
6 Measured temperature (with unit)
7 Softkeys and date/time
7
1 Digital sensors
(pH, conductivity, D.O.)
2 USB B interface (device)
3 USB A interface (host)
4 Connection for line adaptor
5 Service interface
EN
English
3