Publicidad
Idiomas disponibles
Idiomas disponibles
•
No return authorization will be issued for electrical
components once items are installed.
How do You Get Service? In order to be eligible for service under
this warranty you must be the original retail purchaser, and provide
proof of purchase from one of the Company's dealers, distributors,
or retail outlet stores. Portable compressors or components must
be delivered, or shipped, to the nearest Authorized Service Center.
All associated freight costs and travel charges must be borne by
the consumer. Please call our toll free number 1-888-895-4549 for
assistance.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
THE COMPANY MAKES NO OTHER WARRANTY OR
REPRESENTATION OF ANY KIND WHATSOEVER,
EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE. ALL
IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE
ARE HEREBY DISCLAIMED. LIABILITY FOR CONSEQUENTIAL
AND INCIDENTAL DAMAGES UNDER ANY AND ALL
WARRANTIES, OTHER CONTRACTS, NEGLEGENCE, OR
OTHER TORTS IS EXCLUDED TO THE EXTENT EXCLUSION IS
PERMITTED BY LAW.
GLOSSARY
CFM: Cubic feet per minute.
SCFM: Standard cubic feet per minute; a unit of measure of air
delivery.
PSI: Pounds per square inch; a unit of measure of pressure.
Code Certification: Products that bear one or more of the fol-
lowing marks: UL
*, CUL, ETL
®
OSHA certified independent safety laboratories and meet the
applicable Standards for Safety.
* UL
is a registered trademark of Underwriters Laboratories and
®
ETL
is a registered trademark of Electrical Testing Laboratories.
®
California Code: Unit may comply with California Code 462 (l)
(2)/(M) (2). Specification/model label is on the side of the air tank
on units that comply with California Code.
Unloader Blow-Off Pressure: All models are continuous running
units controlled by air tank pressure. When the maximum air
tank pressure is obtained, the unloader valve will blow-off. This
will cause the compressor to exhaust the air to the atmosphere
and not the tank. This decreases the load on the engine and
allows it to run at a near no-load condition.
Unloader Reset Pressure: When the air tank pressure drops to
a predetermined point, the unloader valve closes. The air tank
pressure will now increase until it reaches the unloader blow-off
pressure.
23
*, CETL, have been evaluated by
®
Publicidad
