M 905211020228032023
THERMEX THO1BFPy
87
Fig. 4
Fig. 4
Install the oven in the cabinet. Be sure that cables etc. is correct-
ly positioned and does not get pinched during installation.
Fig. 5
Fig. 5
Secure the oven with 2 screws and washers as shown in the il-
lustration.
Electrical installation
This oven must be earthed!
Thermex® cannot be held responsible for damage caused by
using the oven without an earthed electrical connection. Also
risk of electric shock, short circuit or fire caused by incorrect in-
stallation! The oven may only be connected to the mains by an
authorized professional, and the oven's warranty is only valid
after correct installation.
There is a risk of electric shock, short circuit or fire caused by
damage to the cord. The cord must not be pinched, bent or come
into contact with hot parts of the oven. If the cord is damaged,
it must be replaced by a licensed electrician.
The mains must correspond to the data specified on the stove's
nameplate.
Risk of electric shock.
Before starting the electrical installation, the relay must be
switched off/switched off.