Crosby IP IPSC10 Manual Del Usuario página 4

USER MANUAL
For clamp types:
EN
04
© The Crosby Group LLC. Nothing from this original user instructions publication may, in any way
whatever, be replicated or published without prior written permission from The Crosby Group LLC.
1. General
You have chosen a CrosbyIP lifting clamp.
CrosbyIP clamps are the most reliable clamps available. But using reliable tools does not automati-
cally mean that practices are reliable. The people who work with clamps play an equally important
role in reliable operation. Ensure that everyone who works with CrosbyIP clamps has been instruc-
ted in the proper application of the clamps.
CrosbyIP provides a 10 year warranty for its clamps. To keep CrosbyIP clamps in optimum condi-
tion and keep warranty, regular maintenance is important. Preventive maintenance and repair shall
be carried by a repairer authorized by CrosbyIP. In order to benefit from this warranty programme
and for more details on maintenance procedures, please consult www.thecrosbygroup.com/re-
It is not
sources/crosbyip-10-year-guarantee for more information.
permitted to stay
in the danger
Please read and understand these instructions before using the clamp.
zone of the load.
No changes may 2. Safety precautions
be made to
CrosbyIP
„ Proper instruction for the personnel is of vital importance. This will contribute to maximum
clamps. Never
reliability in the working environment.
straighten,
„ IPSC10 clamps may be applied per piece, per set or with several clamps simultaneously for the
attempt to bend
positioning and seizing of steel plates, beams and constructions. Ensure that each clamp
or heat treat
receives its proportionate share of the load.
parts.
„ Hardness: With the IPSC10 clamps it is possible to handle steel with a hardness of up to 302
HV10. For harder steel types contact your CrosbyIP Customer Service Centre.
Clamps suited
„ Contact your CrosbyIP Customer Service Centre before using this clamp for plates and
for stainless
constructions that have a radius.
steel, must be
„ Temperature: the operating temperature is between –40 ºC (–40 ºF) and 100 ºC (212 ºF). For
used only for
other temperatures contact your CrosbyIP Customer Service Centre.
handling
„ There are restrictions for operation in special atmospheres (e.g. high humidity, explosive, saline,
stainless steel,
acid, alkaline).
to avoid contact
„ Loads: For proper application of the clamp consult the load diagrams 1.
corrosion.
„ Ensure that all attachments are properly fitted, secured and coupled.
„ For each operation only one plate or beam may be positioned or seized with the IPSC10.
„ The clamp with the moving pivot and screw spindle must be placed with face up when the
clamps are used for horizontal plate surfaces.
Attention: ensure that the clamp will not be unscrewed too far, as the moving pivot (K) could fall
off. If the moving pivot hits the body the clamp may not be opened further.
Copyright © 2021 The Crosby Group LLC. All Rights Reserved.
IPSC10
Positioning & seizing