Stihl MH 710.0 Manual De Instrucciones página 16

English
► Slowly pull out starter handle (2) to the point of
noticeable resistance.
► Keep quickly pulling out and returning starter
handle (2) until the engine is running.
► If the engine does not start: see the engine
instruction manual.
9.1.2 Stopping the Engine
► Place the tiller on a level surface.
► Switch off self-propulsion.
The drive is disengaged and the drive shaft no
longer rotates.
► Set main switch (1) to the 0 position.
The engine cuts out.
9.2 Setting the Gear
Four gears can be set.
– 0/R = Idle/reverse gear
– Idle is used to start the engine or to keep
the tiller stationary with the engine running.
– Reverse gear is used to free the hoes or to
position the tiller.
– 1 = Slow forward gear
– Slow forward gear is selected when loosen‐
ing firm soil or when making furrows.
– 2 = Fast forward gear
– Fast forward gear is selected when working
soil additives into loose soil or when tilling
loose soil.
16
9 Starting and Stopping the Tiller
► Move gear lever (1) to the desired position.
NOTICE
■ Set idle for starting the engine and during work
breaks.
9.3 Adjusting the Engine Speed
The engine speed can be regulated using the
throttle lever.
► Start the engine.
► Adjust the engine speed using throttle
lever (1).
9.4 Engaging and Disengaging
Self-propulsion
9.4.1 Engaging Self-propulsion
The clutch lever for self-propulsion is used to
engage or disengage the drive shaft when the
engine is running.
Self-propulsion forwards
When the clutch lever for self-propulsion is actu‐
ated and with the hoes or running wheels
attached and gears 1 or 2 engaged, the tiller
moves forwards.
► Start the engine.
0478-404-9905-C