DeWalt DW076 Manual Del Usuario página 30

E N G L I S H
Package contents
The package contains:
1 Rotary laser
1 Digital laser detector
1 Kitbox
1 Charger
1 Battery pack
1 Instruction manual
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
The rotary laser DW076 has been designed to project
laser lines to aid in professional applications.
The tool can be used both inside and outside for
horizontal (level) alignment. The applications range
from drop-ceiling installation to foundation leveling
and deck building.
The tool accepts D WALT battery packs of 9.6, 12,
E
14.4 and 18 V.
1 On/off switch
2 Carrying handle
3 Rotary laser head
4 Battery pack
Charger
Your DE9116 charger accepts D
NiMH battery packs ranging from 7.2 V to 18 V.
4 Battery pack
5 Release buttons
6 Charger
7 Charging indicator (red)
Display
8 Power indicator
9 Leveling indicator (X-axis)
10 Leveling indicator (Y-axis)
11 Manual adjustment key (for servicing only)
Self-leveling feature
The self-leveling feature realises a quick adjustment
of the rotary laser head. Initiated as the tool is switched
on, the self-leveling feature will level the laser head in
the described tool set-ups at ranges up to +/- 5°.
30
All manuals and user guides at all-guides.com
WALT NiCd and
E
Electrical safety
The electric motor has been designed for various
voltages (see technical data). Always check that the
battery pack power corresponds to the voltage on
the rating plate. Also make sure that the voltage of
your charger corresponds to that of your mains.
Your D WALT charger is double
E
insulated in accordance with EN 60335.
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
Never use a light socket.
Never connect the live (L) or neutral (N)
wires to the earth pin marked E or
Using an extension cable
An extension cord should not be used unless
absolutely necessary. Use an approved extension
cable suitable for the power input of your charger
(see technical data).
.