Operation; Zero Operation; Tare Operation; Change Weighing Unit - Baxtran BS-TRI Serie Manual De Usuario

6. OPERATIONS
Power ON/OFF
Switch on the scale by pressing
If you want to switch off press the key again.

6.1 ZERO OPERATION

You can press the
This will usually only be necessary when the platform is empty. When the zero point is obtained the display will show the
indicator for zero.
The scale has an automatic rezeroing function to account for minor drifting or accumulation of material on the platform.
However you may need to press the
is empty.
Note: if current weight more than ±2% of capacity, Zero function will disable.

6.2 TARE OPERATION

Place a container on the platform, a value for its weight will be displayed.
Press the key to tare the scale. The weight that was displayed is stored as the tare value and that value is su tracted
from the display, leaving zero on the display. The "NET" indicator will be on.
When the container is removed a negative value will be shown. If the scale was tared just before removing the container this
value is the gross weight of the container plus all product that was removed. Press
tare weight.
6.3 CHARGE WEIGHING UNIT
Press and hold

6.4 SET BACK LIGHT

In the weighing mode, press and hold
Display will be show "BK-AU".
Press key to change display to:
• BK- AU to set back light turn on automatically
• BK- OFF to set back light turn off always
• BK- ON to set back light turn on always

6.5. SET LIMITS

Press key during that start up to enter parameters, select F6 CHK . Display will be show "0.0000" (Hi limits set
and red backlight.
. The display is switched on and the self test is started.
key at any time to set the zero point from which all other weighing, within 2% of power up zero
key to rezero the scale if small amounts of weight are shown when the platform
key in the weighing mode to change the weighing unit kg / g.
key.
USER'S MANUAL BS-TRI
key again for to clear the current
EN
5